Summer Starts Here - Save up to 70%
Curt Hitch Cargo Carrier Review - 2016 Hyundai Sonata- Video
Today on our 2016 Hyundai Sonata we're doing a test fit of the CURT 20 by 48 cargo carrier. That part number is C18110. Now this is designed to work with 1-1/4" and 2" hitches and has a 300 pound weight capacity. With it installed on our vehicle we're going to start off with our measurements, ground clearance being first. To the bottom of this bolt we're going to have about 11-1/2". What's great about this carrier compared to others is that we do have that raised shank in the back which is going to lift our carrier even higher than our hitch and give us a little more clearance. more
11/8/2016 9:25:08 AM
Surco Products Hitch Cargo Carrier Review - 2016 Hyundai Sonata- Video
Today on our 2016 Hyundai Sonata we're doing a test fit of the Surco 20 by 48 cargo carrier. That part number is 52017. Now this has a 300 pound weight capacity and is designed to work with 1-1/4" hitches. We already have it installed on our vehicle. We're going to start off with a few measurements. Ground clearance is going to be first here. more
11/8/2016 9:25:04 AM
Surco Products Hitch Cargo Carrier Review - 2013 Hyundai Sonata- Video
Today on our 2013 Hyundai Sonata, we're doing a test fit of Surco 20 by 48 cargo carrier. This is designed for 1 1/4-inch hitches. Has a 300 pound weight capacity. The part number for that is 52017. The first thing we're going to do here take a few measurements. Ground clearance being first. more
3/24/2016 9:38:00 AM
Curt 17x46 Hitch Cargo Carrier Review - 2011 Hyundai Sonata- Video
Today on our 2011 Hyundai Sonata, we are going to be doing a test fit on the 17x46 Curt Compact Cargo Carrier. Now this has been designed for use with inch and a quarter or 2 inch hitches. Part number on it is C18145. Today we are using a class one hitch, that's going to limit our capacity to 200 pounds. We are using the class two rather, we can go up to 350 and with the class three it will go all the way up to 500 pounds. Now to begin our test fit, we are just going to slide the shank of the carrier into the receiver tube of the hitch. We'll line up our threaded hole with our hitch pin hole. more
10/7/2014 10:29:36 AM
Filter Videos
Filter Videos
